BOOK NOW (425) 390-9999
BOOK NOW (425) 390-9999

Navigation

Indoor & Outdoor Lighting & Fixtures
Professional installation, upgrades & repair

Lighting upgrades boost safety, comfort, and curb appeal. We install and repair indoor fixtures—recessed, pendants, chandeliers, under-cabinet—and weather-rated path, porch, and flood lighting. Our licensed electricians deliver clean, code-compliant work across Puget Sound and handle circuit or panel needs. For urgent hazards, our emergency electricians can help.

Call Now: (425) 390-9999

Trusted by homeowners and businesses throughout the Greater Seattle area

    Request a Quote Today


    By entering your phone number, you consent to receive marketing texts from Surge Electrical. Msg & data rates may apply. Reply “STOP” to opt out.

    Emergency Electrical Response & Repair Workflow

    Surge Electrical’s on-call team focuses on rapid hazard control and precise troubleshooting. Whether it’s a partial outage, a hot or buzzing outlet, a burning odor, or a breaker that won’t reset, we arrive 24/7 to secure the area, test circuits and panels, and complete NEC-compliant repairs that restore safe power fast.

    ⚡ Site Safety & Hazard Control
    We secure the space, inspect your panel, receptacles, and branch wiring for heat, arcing, or burn odor, then de-energize any risky circuits. All work follows the National Electrical Code and WA L&I requirements.

    ⚡ Targeted Troubleshooting
    Our techs meter-test breakers, circuits, and devices to isolate the fault—overload, short, open/failed neutral, or defective hardware—and present clear repair options with transparent pricing.

    ⚡ Same-Visit Repairs
    We replace failed switches/outlets, repair conductors, and correct breaker or panel terminations on the spot. If capacity or age is the issue, we’ll recommend panel service or upgrades for long-term safety.

    ⚡ Verification & Walkthrough
    After repairs, we restore power, test protection devices, and confirm stable voltage. We review what was fixed and share prevention tips—like addressing flickering or buzzing lights before they worsen.

    ⚡ Post-Repair Support & Documentation
    We record the fault, parts used, and test results, then outline any recommended follow-up (surge protection, dedicated circuits, or lighting fixes). Have questions later? Reach us anytime or schedule additional work via contact us.

    🛠️ RESTORE POWER FAST

    We isolate hazards, reset or replace failed breakers, and repair unsafe outlets or wiring to bring critical circuits back online. Need follow-up after triage? See our electrical repairs or panel service.

    ✅ SAFETY & CODE COMPLIANCE

    Emergency fixes meet NEC and WA L&I standards. We secure unsafe circuits, correct wiring, and document what was repaired so you have clear records for insurance and resale.

    📞 24/7 ONGOING SUPPORT

    After the immediate repair, we’re here for upgrades and add-ons—from dedicated circuits to whole-home improvements. Questions? Contact us anytime, and see our customer reviews.

    Let Surge Electrical Handle Your Indoor & Outdoor Lighting Across King County & the Puget Sound

    Great lighting transforms how a space looks and works. From bright task lights to warm ambient layers and secure outdoor illumination, we install, replace, and repair fixtures for homes and businesses. Add recessed cans, pendants, vanity and under-cabinet lights, or landscape and security lighting — all installed to code by licensed electricians. Need a fast fix? We also handle lighting repairs and upgrades across King County and the greater Puget Sound region. Contact us for a free estimate.

    IF YOU NOTICE SMOKE, HEAT, OR A BURNING ODOR…

    Turn off the affected breaker (or main, only if safe) and call (425) 390-9999 or contact us for 24/7 emergency help.

    Is This an Electrical Emergency?

    Some electrical problems can’t wait — a few warning signs point to a fire or shock risk. If you notice anything below, call our 24/7 team. We serve homes and businesses across King County and the greater Puget Sound with fast, code-compliant repairs.

    Common emergency warning signs

    Burning smell or scorch marks — Shut power to the circuit and call immediately; overheating wiring can ignite.

    Hot, buzzing, or sparking outlets/switches — Often caused by loose connections or a failing device; do not use the outlet.

    Breaker won’t reset or trips instantly — Could indicate a short or panel fault; see our panel service.

    Widespread flicker or dimming — A possible loose neutral or service issue; learn more about flickering lights.

    Water near panel or outlets — After leaks or flooding, circuits must be made safe before restoring power.

    Indoor & Outdoor Lighting & Fixture Services

    From kitchens and great rooms to patios and pathways, Surge Electrical designs and installs recessed lights, pendants, chandeliers, under-cabinet, landscape, and security lighting. We add smart dimmers/switches, replace outdated fixtures, and fix flicker or buzzing with code-compliant work across King County and the Puget Sound. Contact us or read our customer reviews.

    ⚡ Lighting Design & Diagnostics
    We evaluate rooms, circuits, and controls to solve dark spots, glare, and LED issues—fixing flicker or buzzing and matching brightness/color temperature to your space.

    ⚡ Fixture Installation & Replacement
    From recessed and pendants to chandeliers, vanity, and under-cabinet lights, we install new fixtures and upgrade outdated ones with neat, code-compliant wiring and professional finishing.

    ⚡ Smart Dimmers, Switches & Scenes
    Add dimmers, motion/occupancy sensors, 3-way controls, or smart switches for app and voice control—set scenes, cut energy use, and prevent LED strobing with proper compatibility.

    ⚡ Outdoor & Landscape Lighting
    Path, step, and deck lights, porch and soffit accents, and security floods—plus low-voltage transformers, timers, and photocells—to enhance safety and curb appeal after dark.

    ⚡ Safety, Code & Final Check
    We verify grounding, GFCI/AFCI where required, box fill and support, then aim/level fixtures and test controls. Have questions? Contact us or see our customer reviews.

    ⚡ LED Retrofits & Energy Upgrades
    Swap tired bulbs and can lights for high-efficiency LED trims and drivers (high CRI, correct color temp). We handle compatibility with existing dimmers, balance lumen output room-to-room, and can advise on utility rebates to lower project cost.

    BENEFITS OF PROFESSIONAL INDOOR & OUTDOOR LIGHTING

    Well-planned lighting makes your property safer, more comfortable, and more inviting—inside and out—while lowering energy use. Homeowners and businesses across the Puget Sound region trust Surge Electrical for code-compliant design, installation, and upgrades that brighten spaces, boost curb appeal, and add lasting value.

    REDUCES ELECTRICAL FIRE RISK

    >We mount fixtures to rated boxes, match lamp wattage, and ensure clearances. Damp/wet-location units are sealed and grounded to keep your home safe.

     REPLACES OUTDATED FIXTURES & WIRING

    Swap buzzing ballasts, tired cans, and old wiring for modern LED fixtures and drivers—more light with less energy and far less maintenance. See lighting repairs.

    IMPROVES LIGHT QUALITY & STABILITY

    We size circuits correctly, pair LEDs with compatible dimmers, and tighten loose neutrals—reducing voltage drops and flicker for steady, comfortable lighting.

    ADDS FUNCTION & CURB APPEAL

    Task, accent, and landscape lighting—plus motion sensors, timers, and smart dimmers—make spaces brighter, safer, and easier to live in day and night.

    ENSURES CODE & WEATHER COMPLIANCE

    All installs follow NEC and WA L&I standards with GFCI/AFCI protection and proper wet-location ratings for long-term reliability.

    Protects Your Investment

    Clear estimates, permits handled, photo documentation, and product warranties. Planning a bigger upgrade? Read our customer reviews and explore lighting options.

    INDOOR LIGHTING SERVICES

    From new installs to tasteful upgrades, we handle complete indoor lighting work. Some homes and offices are pre-wired for fixtures such as ceiling fans and chandeliers, while others need new circuits and boxes added. Our licensed electricians can replace dated fixtures with modern, energy-efficient LED options and add smart dimmers where you want control. We install recessed cans, track and pendant lighting, wall sconces, ceiling fans, and hanging chandeliers—cleanly wired, code-compliant, and matched to the look and function of your space.

    Indoor Lighting Service

    NEED INDOOR & OUTDOOR LIGHTING IN THE PUGET SOUND AREA?

    Clean, code-compliant lighting design, install, and repairs—recessed LEDs, pendants, sconces, and security lights. Fast fixture swaps or full upgrades done right.

    Serving homes and businesses across King County and greater Seattle.

    BOOK LIGHTING SERVICE NOW

    SIGNS YOU NEED LIGHTING UPGRADES OR FIXTURE REPAIRS

    Lighting problems aren’t just cosmetic — they affect comfort, safety, and energy use. If you notice any of the issues below, it’s a good time to have Surge Electrical evaluate your indoor or outdoor lighting system:

    Outdoor wall sconce on stone exterior at dusk – porch light fixture | exterior lighting installation in Seattle & King County

    ⚡ Frequent flicker or humming

    Blinking or buzzing lights often point to a dimmer/LED mismatch, a loose neutral, or a failing driver/ballast. A quick check can prevent bigger issues.

    ⚡ Dark spots or uneven coverage

    Rooms that feel cave-like usually need a better layout or more lumens. Add recessed cans, task lights, or under-cabinet lighting for balanced brightness.

    ⚡ Hot fixtures or a burning odor

    Overheating from wrong lamp wattage, old wiring, or loose connections is a safety risk. Turn the fixture off and schedule an inspection.

    ⚡ Switches feel warm or crackle

    Warm, noisy, or sparking switches indicate failing devices or loose terminations. Replacing them restores safe, reliable operation.

    ⚡ Exterior lights fail or trip GFCI

    Moisture, corroded boxes, or bad photocells/timers can knock out outdoor lights. Wet-rated, sealed components solve the problem long-term.

    ⚡ Harsh glare or mismatched color

    Mixed color temperatures and poor optics make spaces uncomfortable. Re-lamp and tune dimming to a consistent, natural look.

    ⚡ Higher-than-normal electric bills

    Incandescent or halogen fixtures waste energy. Upgrading to high-efficiency LEDs cuts costs while improving output and lifespan.

    ⚡ Loose, dated, or sagging fixtures

    Old hardware and weak mounting can be unsafe. Replace fixtures with secure, code-rated options that match your style.

    ⚡ New layout, remodel, or added spaces

    Renovations are the perfect time to add accent, task, and ambient layers—pendants, sconces, and recessed—to elevate function and design.

    Outdoor Lighting Service

    Outdoor Lighting Services

    Illuminate your property and improve safety with professionally designed exterior lighting. Whether you want to showcase trees and architectural features with landscape lights, add path and step lighting, or secure entries with motion-activated floodlights and wall packs, we’ll design and install a clean, code-compliant solution for your home or business.

    Our team handles new circuits, weather-rated fixtures, LED upgrades, and smart controls—right up to parking-lot and area lighting. We’ll explain the differences between ambient and security lighting, recommend the right fixtures and beam spreads, and complete a reliable installation that performs year-round across the Puget Sound region.

    You're Just One Step Away From Safe, Reliable Electrical Work

    Tell us about your project — whether it’s a repair, upgrade, or installation, we’re ready to help.

    Indoor and Outdoor Lighting Repairs

    When you turn a light on, you expect the light to instantly illuminate. If the light does not turn on, and you have checked that the bulb is not the problem, you may be in need of lighting repairs. Lighting repairs can consist of anything from replacing damaged wiring to replacing a damaged light fixture to replacing a blown fuse or popped circuit. One of our licensed electricians can determine the light fixture and determine why it is not illuminating as it should.

    Indoor and Outdoor Lighting Repair

    Call Us for Indoor & Outdoor Lighting in King County & the Puget Sound

    Lighting influences safety, comfort, and style—indoors and out. Whether you need new fixtures installed, existing lights replaced, or repairs to stop flicker and dimming, Surge Electrical delivers clean, code-compliant work for homes and businesses across the greater Seattle area. We service recessed lights, pendants, chandeliers, wall sconces, landscape, and security lighting.

    Illustration of two people reviewing financing options, representing Surge Electrical's flexible payment plans for electrical upgrades and repairs

    Power Your Project, Stress-Free:
    Flexible Financing Options

    Don't let budget concerns delay the electrical upgrades you need. At Surge Electrical, we make it easier than ever to move forward with flexible payment plans designed to fit your lifestyle and budget. Whether it’s a panel upgrade, EV charger installation, or a major repair, our financing options help you get the work done now—without the financial strain.

    Take the first step toward safer, more reliable power today.

    Get a Fast Quote Explore Financing

    Proudly Serving the Greater Seattle Area

    Whether you're in a quiet cul-de-sac in Sammamish or a busy neighborhood in Tacoma, Surge Electrical delivers expert, licensed service you can count on. We cover a wide service area to bring fast response times, transparent pricing, and trustworthy workmanship to homes and businesses across the region.

    Trusted by Homeowners Across Greater Seattle

    We take pride in delivering safe, reliable, and professional electrical solutions—but don’t just take our word for it. See what our satisfied customers have to say about their experience with Surge Electrical.

    Frequently Asked Questions

    We handle end-to-end lighting: design/layout, fixture selection, installation and replacement, new circuits and switching, indoor upgrades (recessed, pendants, chandeliers, under-cabinet, vanity, stair and hallway lighting) and outdoor projects (porch and garage lights, soffit/downlights, landscape and path lighting, deck/post lighting, motion and security lighting).

    Yes. We’ll size the lumen output to the room, recommend color temperature (2700–3000K warm for living areas, 3500–4000K neutral for kitchens/workspaces, 4000–5000K cool for task/garage), and prioritize a high CRI (90+) so colors look natural. We’ll also match trim, finish, and beam spread to the look you want.

    LEDs need compatible dimming. We pair the right dimmer technology (ELV/Reverse-phase, MLV/Forward-phase, 0–10V, or smart dimmers) with the fixture driver to prevent flicker, buzzing, or short lamp life. If you’re having issues now, see our flicker & buzzing guide or ask us to swap in the proper dimmer.

    Simple one-for-one fixture swaps typically don’t. New wiring, circuits, trenching, or added switching usually do. We handle permits and inspections and install to current NEC and Washington L&I requirements, including GFCI/AFCI protection and weather-rated boxes, fittings, and in-use covers outdoors.

    Fixture replacements are often 30–90 minutes each. New recessed lighting in a finished room is commonly a half-day to full day depending on access and patching. Landscape/security lighting varies with run lengths and controls—most projects are completed in one day across the Puget Sound area.

    Absolutely. We set up smart switches, dimmers, and motion/daylight sensors; create scenes and schedules; and integrate with Alexa, Google, or Apple Home. For outdoors, we can add photocells and astronomical timers so your lights track sunrise/sunset automatically.

    Pricing depends on fixture type, access (attic/crawl), ceiling height, drywall/patching needs, and whether a new circuit is required. We offer upfront, line-item estimates and can present good/better/best fixture options to fit your budget.

    LED retrofits cut lighting energy use by 60–85% and run cooler, which helps HVAC. We prioritize ENERGY STAR fixtures where available and can point you to current utility incentives in King County when applicable.

    Yes—most issues trace to dimmer/driver incompatibility, loose connections, or voltage drop. We test the circuit, correct the wiring, and replace mismatched dimmers or drivers. If your panel is contributing to the problem, we’ll advise on panel service.

    Surge Electrical is your trusted source for fast, reliable indoor & outdoor lighting service across King County and the greater Puget Sound. From new fixtures, recessed and pendant lighting, dimmers, and smart controls to landscape and security lighting, our licensed electricians design, install, and repair it all—safely and to code. We also fix flickering/dimming lights and hot or buzzing switches with lasting solutions. Need other work while we’re there? We handle electrical repairs, panel service, and related lighting upgrades, giving you a single point of contact for both projects and quick fixes. Contact us to book your lighting project or request a free estimate.